The Monitor In-Transit temperature chart recorder is a tamper-resistant, simple-to-operate, single-use, reliable battery-powered device that generates a permanent paper strip chart data record of temperature conditions and time duration for up to 10 days run time. Each unit has a tamper-evident seal with a bar code and serial number. The Monitor In Transit requires no preconditioning of the indicator, product, or package. The Monitor In-Transit recorder provides visible start-up verification, Hazard Analysis Critical Control Points (HACCP) documentation, and NIST traceable calibration (+/-1°C).
Instructions for Use
Storage: The shelf life of the Monitor In-Transit is three years from date of manufacture. Preconditioning and special storage are not required.
Application: Fill out the informational tag and remove the top (white) copy. Pull the tab to activate the monitor. Remove the adhesive strip from the cover and close the flap. Place the monitor in the container or on the product.
Interpretation of Results: At destination, the receiver cuts the tamper-evident seal, pushes in on the cover, and lifts up to remove the data chart from the recorder. The chart documents the temperature history of the shipment.
|Monitor In-Transit Specifications|
|Temperature Accuracy||±1°C/2°F or Better|
|Temperature Range||-28°C to +38°C (-20°F to +100°F)|
|Temperature Sensor||NIST Traceable Bi-Metal Coil (HACCP Required)|
|Time Keeping Accuracy||Average 20 Seconds per Month|
|Shelf Life||Three Years from Date of Manufacture|
|Monitor Dimensions||5.5” x 4.125” x 2.6875” (L x W x H)|
|13.8cm x 10.3cm x 6.7cm (L x W x H)|
|Chart Length and Scale||Total Length 36” (91.4cm), Dual Scale °F/°C|
|Drive||Solid State Quartz Controlled Clock Motor|
|Recorders per Case||20|
|Minimum Order||1 Case|
|Case Dimensions||16.625” x 13.25” x 5.75” (L x W x H)|
|42.2cm x 33.7xm x 14.6cm (L x W x H)|
|Case Weight||13.4 lbs. (6 kg)|
|Instruction Languages||English, Spanish|
|Monitor In-Transit Product Information|
|M10 10-Day Run Time|