New clutch line to connect your slave and master cylinder.  This is high quality teflon stainless steel braided line.  It is 35" and will eliminate any hard line.  Uses a banjo fitting on the master side.  Braiding help prevent expansion for crisper action.  This is great line to plumb your clutch system on your 3 spd FJ40, 74 down.

This line has 10mm fitting on both ends.  Be aware that some of the earlier models have 9mm.  We have seen both in the same years.  If yours has 9mm fittings you will need to adapt.  All of the clutch slave and masters made now are 10mm.  If you think that you have 9mm, it is probably best to upgrade to our complete system and replace with 10mm components.